Product ID: AEW-2 |
|
Mold Temperature control unit-AEO ( AEW-2)
Temperature control unit of AEO-series is for Oil type, can be used to injection molding machine, extrusion molding machine and blow molding machine. We adopt the Circuit Breaker by Merlin Gerin and Arc contact by TELEMEACIQUE, temperature controller by YAMATAKE…etc. and easy to operate by humanize panel and enclosed the draft for reference.
| MODEL |
AEW-2 |
| Power Supply |
AC220V~440V 50/60HZ |
| Max. operating Temp. |
120 |
| Mini. Operating Temp. |
Supply oil Temp.+3~10 |
| Medium |
Water |
| Heating capacity |
9kW |
| Cooling Capacity |
5400Kcal/H |
| Cooling Method |
Direct Cooling |
| Accuracy of Temp.Control |
0.5 |
| Pump Power |
2HP |
| Pump Max. Flow. Pressure |
145L/min 3.0kg/CM2 |
| Max. Power Consumption |
9.75kW |
| Water Supply Pressure |
2kg |
| Cooling Water pipe |
1/2" PT |
| Heat oil pipe |
1in 1 out-1" |
| Dimensions L*W*H |
650*300*530MM |
| WEIGHT |
50KG |
|
Mold Temperature control unit
|
| |
Features:
- Direct Switch on funciton
- After open the power, the pipe is drained the air before electrothermalon.
- oil box no heat design
- oil is heating in the pipe, no in the oil box. Advantage for long life cycle. No generated oil gas interface.
- Temperature warning alarm
- when actual temperature setting has a deviation of 2~4(deviation range can be set to automatic), it will trigger the signal lighting and thewarning alarm.
- Compulsory temperature reduction
- press this button before shutting down will result a compulsory temperature reducion of the water(oil)
- Auto draining system
- press the button of drain water/oil before changing the mold.Make use often AIR to drain out the residual water(oil)totally, for a clean mold.
|
|
|
|
|
